0
The blinds selection tips

Open 0 Answers 16 Views Other


 edit
 Dimensions
 The blinds are assembled in both concealed and surface postioned styles. When purchasing, the size of the blinds really should be measured according to distinct assembly methods. Blinds concealed inside the window lattice, its length should be similar to the height of the window, but the width will be reduced by 1~2 cm in the left and right sides from the window. If the window shades are hung outside your window, then the length ought to be about 10 cm longer than the height of the windowpane, and the width is all about 5 cm wider compared to sides of the window to make certain a good shading effect. In general, small rooms for instance kitchens and toilets are with concealed blinds, while large rooms for example living rooms, bedrooms, and dens are definitely suitable for use using exposed blinds.
Look with quality
 The blades in the blinds are an important component to the adjustment blinds. As soon as buying blinds, it is best to first touch the louver blades to view if they are smooth and in some cases, and see if each and every blade will burr. Generally, high-quality blinds are better handled concerning blade details, especially louver blades cut from plastic, wood, and bamboo. If the texture is way better, its service life will be longer.
The adjustment rod is additionally an important part from the blinds. The adjustment lever on the blind has two functions, one is to alter the lifting switch with the blind, and the other would be to adjust the angle in the blade. When inspecting the particular adjustment lever, first hang the blinds and try and pull it to decide if the lifting switch is definitely smooth, then turn the adjustment lever to check out if the blade can be flexible.
Observe color
 The blades and all the accessories, including the insert frame, the adjustment pub, the pull wire, plus the small accessories on the adjustment bar, must be kept in the same color.
Check this finish
 The smoothness with the blade and the insert frame is felt manually ,, and the good high quality product is smooth as well as flat, without the sense of stabbing hands.
Open the curtain as well as test the opening and closing function in the blade
 Rotate the altering rod to open the particular blade, and the blades should maintain an excellent level between the mower blades, that is, the spacing length between the blades is uniform, and the blades are kept straight and get no feeling of bending up and down. When the blades are generally closed, the blades should be in mutual agreement with one another without leakage.
Check the actual deformation resistance  tempered glass supplier
 After your blade is opened, the blade could be pressed down by hand for making the blade under that bend, and then the actual hand is quickly produced. If the blade is immediately restored into the horizontal state, no bending phenomenon appears, indicating how the quality is qualified.
Analyze automatic locking function
 When the blades are all closed, pull the wire to roll-up the blade. At now, pull the wire into the right, the blade must be automatically locked, keep this corresponding rolled up condition, neither continue to rollup, nor loose. Otherwise, we have a problem with the locking purpose.

Please log in or register to answer this question.

...